Doosan DX60R Shop Manual page 386

4. Drain the coolant from the engine block.
• On models equipped with an oil cooler, remove the
coolant hose (1, Figure 308) at the oil cooler.
• On models not equipped with an oil cooler, remove
the coolant drain plug (1, Figure 309) from the
engine block.
5. Loosen the alternator mounting bolts. Loosen and remove
the V-belt and rotate the alternator away from the engine
and out of the way.
Pinch Hazard!
Carefully rotate the alternator toward the cylinder
block while loosening the V-belt. Failure to comply
may result in minor or moderate injury.
6. Remove the engine coolant fan guard (if equipped),
engine coolant fan (1, Figure 311), spacer (2, Figure 311)
and engine coolant pump V-pulley (3, Figure 311).
7. Disconnect the coolant hoses and the temperature switch
lead wire from the engine coolant pump.
8. Remove the engine coolant pump (4, Figure 311). Discard
the gasket.
Engine
Page 206
CAUTION
Figure 308
Figure 309
Figure 310
Figure 311
FG009155
SP001693