Doosan DX60R Shop Manual page 626

Remove Assembled GM Motor from Workbench
1. Turn the workbench upside down.
2. Remove the hex.socket bolts (2 bolts) securing the GM
motor to the workbench.
3. Fasten the eyebolts (2 bolts) to the spindle (2).
NOTE: Be sure that the two eyebolts are opposite to
each other.
4. Hook the hook and wire on the eyebolts and remove the
GM motor from the work bench with a crane.
Travel Motor
Page 68
Figure 146
Figure 147
SP001686