Rotary Group Removal
1.
Lay pump on its side, and remove rotary group from the
axle.
Axle Removal
1.
Remove retaining ring (C-type) (80) using an internal
retaining ring pliers.
2.
Remove oil seal case and O-ring by using two screw
drivers.
3.
Tilting plate disassembly
4.
Using an Allen wrench (6 mm), remove hex socket bolts
(M8 x 22, 4 Each) and plate.
Main Pump
Page 26
Figure 17
Figure 18
Figure 19
Figure 20
SP001488