Doosan DX60R Shop Manual page 431

Installation of Alternator
1. Position the alternator on the gear case. Loosely reinstall
the nut (2, Figure 404) on the gear case stud and the V-
belt adjuster bolt (1, Figure 404).
2. Reconnect the electrical wires to the alternator. Tighten
the nuts to 15 - 20 in.-lb (1.7 -2.3 N•m ; 17-23 kgf•m).
3. Reinstall the V-belt. Tighten the V-belt to the proper
tension as described in See "" on page -70.
4. Start the engine. Listen for any unusual sounds from the
alternator.
Do not operate the engine if the alternator is producing
unusual sounds.
Damage to the alternator will result.
5. Verify that the charge indicator is ON while the engine is
operating. If the charge indicator is not ON, repair the
problem before operating the engine.
Engine
CAUTION
Figure 404
SP001693
Page 251