Doosan DX60R Shop Manual page 43

Fire Prevention and Explosion Prevention
All fuels, most lubricants and some coolant mixtures are
flammable. Leaking fuel or fuel that is spilled onto hot surfaces
or onto electrical components can cause a fire.
Store all fuels and all lubricants in properly marked containers
and away from all unauthorized persons.
Store oily rags and other flammable material in a protective
container.
Do not smoke while you refuel the machine or while you are in a
HDO1015I
refueling area.
Figure 33
Do not smoke in battery charging areas or in areas the contain
flammable material.
Clean all electrical connections and tighten all electrical
connections. Check the electrical wires daily for wires that are
loose of frayed. Tighten all lose electrical wires before you
operate the machine. Repair all frayed electrical wires before
you operate the machine.
Remove all flammable materials before they accumulate on the
machine.
Do not weld on pipes or on tubes that contain flammable fluids.
Do not flame cut on pipes or on tubes that contain flammable
fluids. Before you weld on pipes or on tubes or before you flame
cut on pipes or on tubes, clean the pipes or tubes thoroughly
with a nonflammable solvent.
Track Excavator Safety SP001614
Page 35