6.
Tighten plugs (224) with specified torque.
NOTE:
Tightening torque: 20 ±1.5 kgf•m (196 ±14.7
Nm) (145 ±11 ft lb)
7.
Tighten plugs (226) with specified torque.
NOTE:
Tightening torque: 8 ±1 kgf•m (78.5 ±9.8 Nm)
8.0 kg•m (58 ±7 ft lb)
Input Gear Assembly
1.
Turn the workbench upside down.
2.
Install the input gear (6) to the shaft (102).
NOTE:
The teeth of the input gear should mesh
smoothly with the two spur gears.
3.
Fit the retaining ring (24) to the shaft (102).
Travel Motor
Page 66
Figure 138
Figure 139
Figure 140
Figure 141
SP001686