Doosan DX60R Shop Manual page 708

Cover Disassembly
1. Disassemble and remove control plate.
2. Remove two plugs (GIA).
3. Control piston disassembly
4. Remove two spring seats, two springs and two parallel
pins.
5. Two conic plate spring and spring are between the two
slotted taps and the piston. Mark the right and the left for
differentiation, and place them on the right side.
6. Disassembling the two pistons.
7. Mark the right and the left for differentiation.
Main Pump
Page 28
Figure 25
Figure 26
Figure 27
Figure 28
SP001488