3.
Separate the HEX NUT (23) from the SWASH PLATE (22),
and remove the SHAWH PLATE (22).
4.
Separate the JOINT ASS°ØY (11) from the BODY (1).
5.
Remove the PLATE (19) and separate the PLUG KIT ((II-A,
II-B) from the BODY (1).
6.
Separate the BUSHING (29) from the BODY (1).
Remote Control Valve (Work Lever / Joystick)
Page 10
Figure 6
Figure 7
Figure 8
Figure 9
SP001640