Doosan DX60R Shop Manual page 38

always contact the power utility company directly and
work out a safety plan with them.
Operate Carefully on Snow, Ice and in Very
Cold Temperatures
In icy cold weather avoid sudden travel movements and stay
away from even slight slopes. The machine could skid off to one
side very easily.
Snow accumulation could hide or obscure potential hazards.
Use care while operating or while using the machine to clear
snow.
Warming up the engine for a short period may be necessary, to
avoid operating with sluggish or reduced working capacity. The
jolting shocks and impact loads caused by bumping or
bottoming the boom or attachment are more likely to cause
severe stress in very cold temperatures. Reducing work cycle
rate and workload may be necessary.
When the temperature rises, frozen road surfaces become soft,
and machine travel becomes unstable.
In cold weather, do not touch metal surfaces with your bare
hands. If you touch a metal surface in extremely cold weather,
your skin may freeze to the metal surface.
Operations on Slopes
When working on slopes. there is a danger that the machine
may lose its balance and turn over, when swinging, or when
work equipment is operated. Always carry out these operations
carefully.
Do not swing the work equipment from the uphill side to the
downhill side when the bucket is loaded. This operation is
dangerous.
If the machine has to be used on a slope, pile the soil to make a
platform that will keep the machine as horizontal as possible.
In addition, lower the bucket as far as possible, keep it pulled
into the front, and keep the swing speed as low as possible.
Track Excavator Safety
Page 30
Figure 24
FG012413
SP001614