Doosan DX60R Shop Manual page 428

8. Using a press, remove the rotor assembly (1, Figure 394)
from the front frame housing (2, Figure 394) and rear
frame housing (1, Figure 394).
9. Remove the stator assembly (1, Figure 395) from the front
frame housing.
10. If it is necessary to replace the bearing (2, Figure 395) in
the front frame housing, remove the four bolts (3, Figure
395) securing the plate (4, Figure 395) to the front frame
housing. Remove the plate. Use a puller to remove the
bearing. Discard the bearing.
11. If it is necessary to replace the bearing (1, Figure 396) in
the rear frame housing, use a puller to remove. Discard
the bearing. Remove the bearing cover (2, Figure 396)
and two thrust washers (3, Figure 396).
Engine
Page 248
Figure 394
Figure 395
Figure 396
SP001693