5.
Remove the piston assembly (piston (105), shoe (106))
from cylinder block (104).
NOTE:
When removing, grip retainer plate (107) with
both hands and remove together with the
retainer plate. The piston assembly is a
minimum unit. If replacement is necessary,
replace the piston assembly as one unit.
6.
Remove the piston assembly from retainer plate (107).
7.
Remove thrust ball (108) from cylinder block (104).
8.
Draw out three needle rollers (151) from cylinder block
(104).
Travel Motor
Figure 64
Figure 65
Figure 66
Figure 67
SP001686
Page 41