Doosan DX60R Shop Manual page 622

5. Apply hydraulic fluid to the ball bearing (150), and fit the
ball bearing into the rear flange (201).
6. Insert the parallel pins (241) (2 pins) in the pin holes of the
rear flange (201).
7. Apply grease to the mating face with the rear flange (201)
of the timing plate (109).
NOTE: Fitting of timing plate (109) is carried out until
the timing plate adheres to the rear flange
(201). Adhesion prevents the timing plate from
falling from the rear flange when mounting the
rear flange on spindle (2).
8. Fit the timing plate (109) on the rear flange (201) using the
parallel pin (241) as a guide.
Travel Motor
Page 64
Figure 131
Figure 132
Figure 133
SP001686