Air Test; Product Pressure Test - WAGNER GM 5000EAC F Operating Manual

Electrostatic aircoat spray gun for manual operation and for flat or round jet nozzles

Hide thumbs Also See for GM 5000EAC F:

Table of Contents

EDITION 07/2014

OPERATING MANUAL

8.6.2

AIR TEST

Connect test or air hose to the spray gun and switch on mains pressure to a maximum of

0.8 MPa; 8 bar; 116 psi.

Checking the air valve

The air valve must switch on and off correctly.

Test up to approx. 0.8 MPa; 8 bar; 116 psi.

Air tightness

With the trigger unactuated, test for air tightness at the points marked in the illustration:

8.6.3

Connect high-pressure hose to the spray gun.

Test the spray gun for tightness with solvent or spray oil (e.g. Macrol 52) and a maximum

pressure of 25 MPa; 250 bar; 3,626 psi.

Observe the following gun components:

Product connection, nozzle body, product valve (no after-spraying).

Exploding gas / air mixture!

Danger to life from fl ying parts and burns.

ORDER NUMBER DOC 2344500

B_03213

DANGER

Never spray into a closed tank.

Ground the tank.

Table of Contents