Handling Hazardous Liquids, Varnishes And Paints; Touching Hot Surfaces; Protective And Monitoring Equipment - WAGNER GM 50000EAC Translation Of The Original Operating Manual

Electrostatic aircoat spray gun

Table of Contents

EDITION 05/2015

OPERATING MANUAL

4.2.5

HANDLING HAZARDOUS LIQUIDS, VARNISHES AND PAINTS

When preparing or working with lacquer and when cleaning the device, follow the

working instructions of the manufacturer of the lacquers, solvents and cleaning agents

being used.

Take the specifi ed protective measures, in particular wear safety goggles, protective

clothing and gloves, as well as skin protection cream if necessary.

Use a mask or breathing apparatus if necessary.

For suffi cient health and environmental safety: Operate the device in a spray booth or

on a spraying wall with the ventilation (extraction) switched on.

Wear suitable protective clothing when working with hot products.

4.2.6

Only touch hot surfaces if you are wearing protective gloves.

When operating the device with a coating product with a temperature of > 43 °C; 109.4 °F:

- Identify the device with a warning label "Warning – hot surface".

Order No.

9998910

Instruction label

9998911

Protection label

Note: Order the two stickers together.

4.3

Protective and monitoring equipment must not be removed, modifi ed or rendered

unusable.

Regularly check for perfect functioning.

If defects are detected on protective and monitoring equipment, the system must not

be operated until these defects are remedied.

ORDER NUMBER DOC2319150

Table of Contents