Cleaning; Handling Hazardous Liquids, Varnishes And Paints; Touching Hot Surfaces; Correct Use - WAGNER GM 4700AC-H Translation Of The Original Operating Manual

VERSION 09/2011
OPERATING MANUAL
2.2.4

CLEANING

De-energize the unit electrically.
Disconnect the pneumatic supply line.
Relieve the pressure from the unit.
Ensure that the flash point of the cleaning agent is at least 5 K above the ambient
temperature.
To clean, use only solvent-damped cloths and brushes. Never use hard objects or spray
cleaning agents on with a gun.
An explosive gas/air mixture forms in closed containers.
When cleaning units with solvents, never spray into a closed container.
Ground the container.
2.2.5

HANDLING HAZARDOUS LIQUIDS, VARNISHES AND PAINTS

When preparing or working with paint and when cleaning the unit, follow the working
instructions of the manufacturer of the paints, solvents and cleaning agents being
used.
Take the specifi ed protective measures, in particular wear safety goggles, protective
clothing and gloves, as well as hand protection cream if necessary.
Use a mask or breathing apparatus if necessary.
For suffi cient health and environmental safety: Operate the unit in a spray booth or on
a spraying wall with the ventilation (suction) switched on.
Wear suitable protective clothing when working with hot materials.
2.2.6

TOUCHING HOT SURFACES

Touch hot surfaces only if you are wearing protective gloves.
When operating the unit with a coating material with a temperature of > 43 °C;109.4 °F:
- Identify the unit with a warning sticker "Warning - Hot Surface".
Order No.
9998910 Instruction sticker
9998911 Protection sticker
2.3

CORRECT USE

WAGNER accepts no liability for any damage arising from incorrect use.
Only use the unit to work with the materials recommended by WAGNER.
Only operate the unit as a whole.
Do not deactivate safety fi xtures.
Use only WAGNER original spare parts and accessories.
2311730
ORDER NUMBER DOC
GM 4700AC
8