7.7 Configuring t
Configuring the OSD Settings (F2)
You can configure the following OSD settings:
You can configure the following OSD settings:
Network parameters
OSD hotkey
Keyboard Language
To configure the OSD settings
configure the OSD settings:
1. Press F2.
The OSD Settings window
In the Settings window, you can
bottom of the window, press the Tab key to go to the top of the window. Change
bottom of the window, press
settings by typing in the selected area or by pressi
settings by typing in the selected area or by pressing the spacebar – whichever is
relevant.
Changing the Network Parameters
7.7.1
You can configure the:
Device IP address
KVM.Net address
Configuring the Device IP Address
Configuring the Device IP Address
When a DHCP server is active on the same network to which Smart 216/232 IP is
When a DHCP server is active on the same network to which Smart 216/232 IP is
When a DHCP server is active on the same network to which Smart 216/232 IP is
connected, the DHCP can provide automatic IP assignment. However, best practices
DHCP can provide automatic IP assignment. However, best practices
DHCP can provide automatic IP assignment. However, best practices
recommend using MAC address reservations in the DHCP server to ensure that the IP
recommend using MAC address reservations in the DHCP server to ensure that the IP
recommend using MAC address reservations in the DHCP server to ensure that the IP
address of the Smart 216/232
Consult your Network Administrator regarding the use
your Network Administrator regarding the use of the DHCP.
Selecting Automatic IP Address Assignment
Selecting Automatic IP Address Assignment
Operating the Smart 216/232 IP Switching System Locally
ndow appears.
Figure 66 – OSD Settings Window
, you can navigate downwards using the Tab key. At the
to go to the top of the window. Change
Network Parameters
216/232 IP will not be changed.
IP Switching System Locally
Configuring the OSD Settings (F2)
Configuring the OSD
key. At the
whichever is
User Guide | 75