Source; Source:fm[:State] - HP VXI 75000 C Series User's And Scpi Programming Manual

SOURce

Subsystem Syntax

SOURce:FM[:STATe]

Parameters
Comments
Chapter 6
The SOURce command subsystem allows configuring output SCPs as well as linking
channels to output functions.
SOURce
:FM
:STATe 1 | 0 | ON | OFF,(@< ch_list >)
:STATe? (@< channel >)
:FUNCtion
[:SHAPe]
:CONDition (@< ch_list >)
:PULSe (@< ch_list >)
:SQUare (@< ch_list >)
:PULM
:STATe 1 | 0 | ON | OFF,(@< ch_list >)
:STATe? (@< channel >)
:PULSe
:PERiod < period >,(@< ch_list >)
:PERiod? (@< channel >)
:WIDTh < pulse_width >,(@< ch_list >)
:WIDTh? (@< channel >)
SOURce:FM[:STATe] < enable >,(@< ch_list >)
mode for a PULSe channel.
Parameter Parameter
Name Type
enable boolean (uint16)
ch_list string
•
This command is coupled with the SOURce:PULM:STATE command. If the
FM state is ON then the PULM state is OFF. If the PULM state is ON then the
FM state is OFF. If both the FM and the PULM states are OFF then the PULSe
channel is in the single pulse mode.
•
If the channels specified are not on a Frequency/Totalize SCP, an error will be
generated.
•
Use SOURce:FUNCtion[:SHAPe]:SQUare to set FM pulse train to 50% duty
cycle. Use SOURce:PULSe:PERiod to set the period
•
*RST Condition: SOUR:FM:STATE OFF, SOUR:PULM:STATE OFF,
enables the Frequency Modulated
Range of
Values
1 | 0 | ON | OFF
100 - 163
HP E1415 Command Reference
Default
Units
none
none
261