Table of Contents
Advertisement
Usage
MEMory:VME:STATe?
Comments
Usage
Chapter 6
MEMORY:VME:STATE ON
MEM:VME:STAT 0
MEMory:VME:STATe?
disabled. Returned value of 1 indicates VME memory is enabled.
•
This command is only available in systems using an HP E1405B or HP
E1406A command module.
•
Returned Value: Numeric 1 or 0. C-SCPI type uint16.
•
Related Commands: MEMory subsystem, and FETCH?
MEM:VME:STAT?
enable VME card as reading storage
Disable VME card as reading storage
returned value of 0 indicates that VME reading storage is
Returns 1 for enabled, 0 for disabled
HP E1415 Command Reference
MEMory
219
Advertisement
Table of Contents
