OUTPut
Parameters
Comments
Usage
OUTPut:SHUNt?
Parameters
Comments
Usage
OUTPut:TTLTrg:SOURce
224 HP E1415 Command Reference
Parameter
Parameter
Name
Type
enable
boolean (uint16)
ch_list
channel list (string)
•
If ch_list specifies a non strain SCP, a 3007 "Invalid signal conditioning
plug-on" error is generated.
•
When Accepted: Not while INITiated
•
Related Commands: [SENSe:]FUNCtion:STRain..., [SENSe:]STRain...
•
*RST Condition: OUTP:SHUNT 0 on all Strain SCP channels
OUTP:SHUNT 1,(@116:119)
OUTPut:SHUNt? (@< channel >)
specified Strain SCP channel.
Parameter
Parameter
Name
Type
channel
channel list (string)
•
channel must specify a single channel only.
•
If channel specifies a non strain SCP, a 3007 "Invalid signal conditioning
plug-on" error is generated.
•
Returned Value: Returns 1 or 0. The C-SCPI type is uint16.
•
Related Commands: OUTP:SHUNT
OUTPUT:SHUNt? (@116)
OUTPut:TTLTrg:SOURce < trig_source >
event that will operate the VXIbus TTLTRG lines.
Range of
Values
0 | 1 | ON | OFF
100 - 163
add shunt resistance at channels 16
through 19
returns the status of the shunt resistance on the
Range of
Values
100 - 163
Check status of shunt resistance on
channel 16
selects the internal source of the trigger
Default
Units
none
none
Default
Units
none
Chapter 6