Table of Contents
Advertisement
IEEE-488.2 Common Command Reference
*WAI
Note
296 HP E1415 Command Reference
341:
Freq/PWM/FM SCPinternal data0 register
342:
Freq/PWM/FM SCPinternal data1 register
343:
Freq/PWM/FM SCPinternal parameter register
344:
Freq/PWM/FM SCPon-board processor self-test
345:
Freq/PWM/FM SCPon-board processor self-test
346:
Freq/PWM/FM SCPuser inputs
347:
Freq/PWM/FM SCPuser outputs
348:
Freq/PWM/FM SCPoutputs ACTive/PASSive
349:
Freq/PWM/FM SCPoutput interrupts
350:
Watchdog SCPenable/disable timer
351:
Watchdog SCPrelay drive and coil closed
352:
Watchdog SCPrelay drive and coil open
353:
Watchdog SCPI/O Disconnect line
354:
Watchdog SCPI/O Disconnect supply
Wait-to-continue. Prevents an instrument from executing another command
*WAI
until the operation begun by the previous command is finished (sequential operation).
Do not use *WAI to determine when the CAL:SETUP or CAL:TARE commands
have completed. Instead, use their query forms CAL:SETUP? or CAL:TARE?.
CAL:SETUP? and CAL:TARE? return a value only after the CAL:SETUP or
CAL:TARE operations are complete.
Chapter 6
Advertisement
Table of Contents
