Table of Contents
Advertisement
Crimp-and-Insert Tools
The hand crimp tool (part number HP 91518A) is used for crimping contacts onto a
conductor. The pin extractor tool (part number HP 91519A) is required for removing
contacts from the crimp-and-insert connector. These products are not included
with Option A3E or with the terminal option accessories listed earlier.
Extra Crimp-and-Insert Connectors
The crimp-and-insert connector is normally supplied with Option A3E. Contact
Hewlett-Packard Company if additional connectors are needed. Order HP 91484B.
Option A3F
Option A3F allows an HP E1415 to be connected to an HP E1586 Rack Mount
Terminal Panel. The option provides 4 SCSI plugs on a Terminal Module to make
connections to the Rack Mount Terminal Panel using 4 separately ordered SCSI
cables. Option A3F Is shown in Figure 2-18.
Figure 2-18. Option A3F
Chapter 2
Field Wiring
51
Advertisement
Table of Contents
