Diagnostic:ieee; Diagnostic:interrupt[:Line]; Diagnostic:interrupt[:Line] <Intr_Line - HP VXI 75000 C Series User's And Scpi Programming Manual

Usage

DIAGnostic:IEEE?

Comments

DIAGnostic:INTerrupt[:LINe]

Parameters
Comments
Usage

DIAGnostic:INTerrupt[:LINe]?

Comments
Usage
Chapter 6
according to the IEEE-754 standard. When <mode> is set to 0, the module
returns values as ±9.9E37 for INF and 9.91E37 for NAN.
•
Related Commands: DIAG:IEEE?
•
*RST Condition: DIAG:IEEE 1
Set IEEE mode
DIAG:IEEE 1

DIAGnostic:IEEE?

returns the currently set IEEE mode.
•
The C-SCPI type is int16.
•
Related Commands: DIAG:IEEE
•
*RST Condition: DIAG:IEEE 1
DIAGnostic:INTerrupt[:LINe] < intr_line >
module will use.
Parameter Parameter
Name Type
intr_line numeric (int16)
•
Related Commands: DIAG:INT:LINE?
•
Power-on and *RST Condition: DIAG:INT:LINE 1
DIAG:INT:LINE 5
DIAGnostic:INTerrupt[:LINe]?
set to use.
•
Returned Value: Numeric 0 through 7. The C-SCPI type is int16.
•
Related Commands: DIAG:INT:LINE
DIAG:INT?
INF values returned in IEEE standard
sets the VXIbus interrupt line the
Range of
Values
0 through 7
Module will interrupt on interrupt line 5
returns the VXIbus interrupt line that the module is
Enter statement will return 0 through 7
HP E1415 Command Reference
DIAGnostic
Default
Units
none
201