Attaching/Removing The Hp E1415 Terminal Module - HP VXI 75000 C Series User's And Scpi Programming Manual

Attaching/Removing the HP E1415 Terminal Module

Chapter 2
Figure 2-12 shows how to attach the terminal module to the HP E1415 and Figure
2-13 shows how to remove it.
Extend the extraction levers on the
1
Terminal Module
Install Mylar Thermal Barrier
on Terminal Module
Extraction Lever
Use a small screwdriver
to pry and release the
two extraction levers
Extraction Lever
Apply gentle pressure to attach
3
the Terminal Module to the
HP E1415 Module
Push in the extraction levers
4
to lock the Terminal Module
onto the HP E1415 Module
Figure 2-12. Attaching the HP E1415 Termina
connectors
HP E1415
Align the Terminal Module
2
connectors to the HP E1415
module connectors
Extraction
Levers
Field Wiring 45