HP Dynamic Smart Array Controllers Overview HP Dynamic Smart Array is a RAID solution combining a storage host bus adapter (HBA) and proprietary software components. Eliminating most of the hardware RAID controller components and relocating advanced RAID algorithms from a hardware-based controller into device driver software lowers the total solution cost, while still maintaining comparable RAID protection and full compatibility with Smart Array disk format, configuration utilities, and management/monitoring software.
RAID algorithms into device driver software. Performance and data protection innovation.HP has extended the support of SATA Solid State Disks into the Dynamic Smart Array B120i Controller and support of SAS and SATA Solid State Disks into the Dynamic Smart Array B320i for enhanced performance.
512 MB 40-bit wide DDR3-800MHz flash backed write cache write back caching with FBWC Capacity Given the increasing need for high performance and rapid capacity expansion, the HP Dynamic Smart Array Controllers offer: Up to 32TB of total internal storage with 8 x 4TB LFF SATA hard drives Up to 9.6TB of total internal storage 8x 1.2TB SFF SAS hard drives (B320i with SAS license)
Coverage - Extend hours of coverage from 9 hours x 5 days to 24 hours x 7 days Duration - Select duration of coverage for a period of 1, 3, or 5 years Warranty upgrade options can come in the form of Care Packs, which are sold at the HP System level this product attaches too DA - 14343 Worldwide —...
These tools lower the total cost of ownership by reducing training and technical expertise necessary to install and maintain HP server storage.
Protect your business beyond warranty with HP Care Pack Services When you buy HP Options, it's also a good time to think about what level of service you may need. HP Care Pack services provide total care and support expertise with committed response choices designed to meet your IT and business need.
Offers customers a single point of contact for server problem diagnosis, hardware problem resolution to return the hardware in operating condition within 6 hours of the initial service request to the HP Global Solution Center, and basic software problem diagnosis, fault isolation, and resolution if available to HP.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced by HP due to malfunction. It does not apply to any exchange of Disk or SSD/Flash Drives that have not failed. SSD/Flash Drives that are specified by HP as consumable parts and/or that have exceeded maximum supported lifetime and/or the maximum usage limit as set forth in the manufacturer's operating manual or the technical data sheet are not eligible for the defective media retention service feature option.
Related Options HP Optional Upgrades HP Dynamic Smart Array Cache options HP 512MB B-series 36 inch Dynamic Smart Array Flash Backed Write Cache for ML/DLs 631922-B21 HP 512MB B-series Dynamic Smart Array Flash Backed Write Cache with 24 inch Cable...
QuickSpecs HP Dynamic Smart Array Controllers Technical Specifications HP Dynamic Smart Array Dimensions Embedded B120i Controller Disk Drive and Enclosure Up to 6Gb/s SATA (Serial ATA) Interface - Transfer rate Connectors 6 internal SATA connectors Server Interface x4 PCIe 2.0...
The information contained herein is subject to change without notice. Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.