Table of Contents
Advertisement
Rack Mount
There are two different cables available for connecting the HP E1586 Rack Mount
Terminal Panel to the HP E1415 Option A3F. In both cases, four cables are required
Terminal Panel
if all 64-channels are needed. These cables do not come with the HP E1415 Option
Accessories
A3F and must be ordered separately.
Standard Cable
This cable (HP E1588A) is a 16-channel twisted pair cable with an outer shield. This
cable is suitable for relatively short cable runs.
Custom Length Cable
This cable (HP Z2220A Option 050) is available in custom lengths. It is a 16-channel
twisted pair cable with each twisted pair individually shielded to provide better
quality shielding for longer cable runs.
HF Common Mode Filters
Optional High Frequency Common Mode Filters are on the HP E1586 Rack Mount
Terminal Panel's input channels (HP E1586 Option 001, RF Filters). They filter out
AC common mode signals present in the cable that connects between the terminal
panel and the device under test. The filters are useful for filtering out small common
mode signals below 5 Vp-p. To order these filters, order HP E1586 Option 001.
52 Field Wiring
Chapter 2
Advertisement
Table of Contents
