Table of Contents
Advertisement
Appendix B
"Error 36:Expecting a default PID parameter"
"Error 37:Too many FIFO or CVT writes per scan
"Error 38:Statement is too complex"
"Error 39:Unterminated comment"
3085
'Algorithm too big' Algorithm exceeded 46K words
(23K if enabled to swap), or exceeded size specified in
<swap_size>.
3086
'Not enough memory to compile Algorithm' Your
algorithm's constructs are using too much translator
memory. Need more memory in your HP E1406. Try
breaking your algorithm into smaller algorithms.
3088
'Too many functions' Limit is 32 user defined functions
3089
'Bad Algorithm array index' Must be from 0 to
(declared size)-1
3090
'Algorithm Compiler Internal Error' Call HP with
details of operation.
3091
'Illegal while not initiated' Send INIT before this
command
3092
'No updates in queue'
3093
'Illegal Variable Type' Sent ALG:SCAL with identifier
of array, ALG:ARR with scalar identifier,
ALG:UPD:CHAN with identifier that is not a channel,
etc.
3094
'Invalid Array Size' Must be 1 to 1024
3095
'Invalid Algorithm Number' Must be 'ALG1' to
'ALG32'
3096
'Algorithm Block must contain termination ' Must
append a null byte to end of algorithm string within the
Block Data
3097
'Unknown SCP. Not Tested' May receive if you are
using a breadboard SCP
3099
'Invalid SCP for this product'
3100
'Analog Scan time to big. Too much settling time'
Count of channels referenced by algorithms combined
with use of SENS:CHAN:SETTLING has attempted to
build an analog Scan List greater than 64 channels.
trigger"
Error Messages
341
Advertisement
Table of Contents
