Setting IO Interfaces
The oscilloscope provides abundant IO interfaces, including: USB Device, LAN and Aux
Output.
To Set the USB Device
Do the following steps to set the oscilloscope to communicate with a PC via USB:
1. Install the USBTMC device driver on the PC. Also install NI Visa.
2. Connect the oscilloscope with the PC using a standard USB cable.
3. Press the Utility button on the front panel to enter the UTILITY function menu.
4. Press the IO Set softkey to enter the I/O SET function menu.
5. Press the USB Device softkey to select USBTMC.
6. Use NI Visa to communicate with the oscilloscope.
Do the following steps to set the oscilloscope to print the screen image:
1. Connect the oscilloscope with printer using a standard USB cable.
2. Press the Utility button on the front panel to enter the UTILITY function menu.
3. Press the IO Set softkey to enter the I/O SET function menu.
4. Press the USB Device softkey to select Printer.
5. Press the Print button on the front panel to print the screen image.
User Manual 175