To Clear Measurement Parameters; To Make All Measurement - Teledyne T3DSO1000A Series User Manual

Clear Measurement Parameters
Press the Clear softkey to clear all the measurement parameters that are displaying on
the screen.
To Make All Measurements
All measurements could measure all the voltage, time and delay parameters of the
current measurement source and display the results on the screen.
Do the following steps to make all parameters measurement.
1. Press the Measure button on the front panel to enter the MEASURE function menu.
2. Press the All Measure softkey to select On.
3. Press the Source softkey to select the measurement source.
Figure 71 All Parameters Measurement
User Manual 137