Document Overview - Teledyne T3DSO1000A Series User Manual

Document Overview

This manual describes how to use the digital oscilloscope in detail.
Quick Start
Set the Vertical System
Set the Horizontal System
Set the Sampling System
Trigger the Oscilloscope
Serial Trigger
Save Reference Waveforms
How To Make Math Operations
How To Make Cursor Measurements Introduce how to use cursors to make
How To Use Measurement Functions Introduce how to use the measurement function
Display Settings
Save and Recall
System Settings
Default
Troubleshooting
Provide information about preparation before
using the instrument and a brief introduction to
the instrument.
Introduce the functions of the vertical system of
the oscilloscope.
Introduce the functions of the horizontal system
of the oscilloscope.
Introduce the functions of the sampling system
of the oscilloscope.
Introduce the trigger mode, trigger coupling,
trigger hold off, external trigger and various
trigger types of the oscilloscope.
Introduce how to trigger on serial input signals.
Introduce how to save and display REF
waveforms.
Introduce the math operation function of the
oscilloscope.
measurements.
to measure the waveform parameters.
Introduce how to set up the oscilloscope
display.
Introduce how to save and recall the
measurement result and the settings of the
oscilloscope.
Introduce how to adjust the system setup.
Introduce the Default setup of the oscilloscope
Introduce how to deal with common failures of
the oscilloscope.
User Manual IX