Digital Channels (Option)
This chapter describes how to use the digital channels of a Mixed-Single Oscilloscope
(MSO).
Note: The digital channel option is not available on the T3DSO1102 oscilloscope
This chapter contains the following items:
◆ To Connect the Digital Probes to the Device-under-test
◆ Acquiring Waveforms Using the Digital Channels
◆ To Change the Display Type of the Digital Channels
◆ To Switch a Single Channel On or Off
◆ To Switch All Digital Channels On or Off
◆ To Change the Logic Threshold for Digital Channels
◆ To Reposition a Digital Channel
◆ To Display Digital Channels as a Bus
154 User Manual