Table of Contents
Advertisement
To Adjust the REF Waveform Display
1. Please refer to the "To Display a REF Waveform" above to display the desired
reference waveform.
2. Press the Scale and Position softkey and turn the
scale and position of the reference waveform. The vertical scale and position
information displays in the middle of the screen.
The initial values displayed in the middle of the screen is the setup that was saved with
the reference waveform.
Note: Only the vertical Variable knob and the vertical Position knob work for
the reference waveform and the math waveform.
116 User Manual
Reference Waveform
Figure 57
knob to adjust the vertical
universal
Advertisement
Table of Contents
