Table of Contents
Advertisement
Keyboard Test
Keyboard test is used to test that the keys and knobs work correctly.
Do the following steps to do the keyboard test:
1. Press the Utility button on the front panel to enter the UTILITY function menu.
2. Press the Next Page softkey to go to the second page of the UTILITY function menu.
3. Press the Next Page softkey to go to the third page of the UTILITY function menu.
4. Press the Do Self Test softkey to enter the SELFTEST function menu.
5. Press the Keyboard Test softkey to enter the keyboard test interface, as the picture
shows below.
6. How to perform the knobs and the buttons test.
Knob test: The default value is 0. Turn the knob left to increase the value whilst
turning the knob right will decrease the value. Push the knob to set the value to 0.
Button test: A button will light up the first time a button is pressed, and extinguished
the second time the button is pressed.
7. Press the Run/Stop button 3 times to exit the keyboard test program.
182 User Manual
Figure 99 Keyboard Test
Advertisement
Table of Contents
