UART/RS232 Serial Decode
After completing the setup of UART signal and trigger, we will decode UART signals.
Operation steps as follows.
1. Press Decode→ Decode. Select one of the options from the Decode1 and Decode2.
2. Press Display and select On to display the result of decoding.
3. Press List to enter the LIST function menu.
4. Press Display and choose the same options as the first step.
5. Press Lines and set the number of lines using the Universal Knob. The range of the
lines is 1 to 7.
6. Press Format to change the character encoding format of the decoding's result.
7. Press Scroll and turn the Universal Knob to view all frames.
Figure 51 UART/RS232 Decode
User Manual 101