Table of Contents
Advertisement
SPI Triggering
This part will provide a brief introduction and description for the operation of the SPI
trigger.
1. Press Setup key to enter the TRIGGER function menu.
2. Press Type and select Serial.
3. Press Protocol and select SPI.
4. Press Trigger Setting softkey.
5. Press the Trigger Type softkey to select the trigger condition.
Function
Settings
Menu
MISO
Trigger Type
MOSI
6. Press the Data Length softkey, and turn the Universal Knob to set the length of a data.
The range of data length is 4 to 96 bits.
7. Set the value of the trigger data.
●
Set the value of a bit:
a.
Press the Bit Roll softkey to select a bit in the data.
b.
Press the Bit Value softkey to set the value of the selected bit.
●
Set the value of all bits:
a.
Press the All Same softkey to set the value of all bits.
Figure 46 SPI TRIG SET Menu
Table 2 Menu, the SPI trigger types
Explanation
Master-In, Slave-Out
Master-Out, Slave-In
User Manual 93
Advertisement
Table of Contents
