Systems
System Status:
1.
Press Utility →NextPage4/4→ AWG → System, then select the System Status option
to view the AWG's system information, including software version, hardware version, and
serial number. After finished, press the return soft key to quit the interface of system
information.
2. Update
The software version file of the AWG can be updated directly via U-disk. Follow the
steps below:
1. Insert U-disk with firmware update file (*.awg) to USB host interface on the front
panel of the oscilloscope. A message "USB Flash Drive detected!" Will be
displayed.
2. Press Utility →NextPage4/4→ AWG →System →Update
3. Expand the U disk directory, Select the firmware file (*.awg), then press the Press
to update, an upgrade progress bar will be displayed on the interface.
Figure 93
AWG System Information Interface
User Manual 173