To Clear The Display - Teledyne T3DSO1000A Series User Manual

3. When the Persist is On, to erase the results of previous acquisitions from the display,
press the Clear Persist softkey. The oscilloscope will start to accumulate
acquisitions again.
4. To return to the normal display mode, turn off persist and the previous acquisitions will
be clear at once.

To clear the display

Press the Display button on the front panel to enter the DISPLAY function menu; press the
Clear Display softkey to clear all the waveforms displaying on the screen and acquire new
waveforms.
Figure 75 Persist Set to Infinite
User Manual 141