Table of Contents
Advertisement
User Interface
1. Oscilloscope Display
The oscilloscope display is the main area to see most of the settings and the menus.
2. Channel Label/Waveform
Different channels are marked by different colors and the color of the waveform
complies with the color of the channel.
3. Trigger Status
Available trigger status includes Ready, Auto, Stop, Arm, Trig'd.
4. Horizontal Time Base
●
Represent the time per graticule on the horizontal axis on the screen.
●
Use the TIMEBASE Knob to adjust the parameter. The available
range is from 1.0 ns to 100 s.
5. Trigger Position
Turn the Horizontal Position Knob to adjust the delay. Push the knob to set the
value to 0 (center of the screen) automatically.
6. Trigger Delay Label
Indicate the trigger zero time position on the waveform.
22 User Manual
Figure 13 User Interface
Advertisement
Table of Contents
