To View The System Status - Teledyne T3DSO1000A Series User Manual

To View the System Status

Do the following steps to view the system status:
1. Press the Utility button on the front to enter the UTILITY function menu.
2. Press the System Status softkey to view the system status of the oscilloscope. The
system status includes the information below:
●
Startup Times: record the boot-strap times of the oscilloscope.
●
Software Version: list the current software version of the oscilloscope.
●
Fpga Version: list the current fpga version of the oscilloscope.
●
Hardware Version: list the current hardware version of the oscilloscope.
●
Product Type: display the product type of the oscilloscope.
●
Serial NO.: list the serial number of the oscilloscope.
●
Scope ID: display the scope identification of the oscilloscope.
3. Press the Single button on the front panel to exit.
Figure 86 System Status
User Manual 161