How To Make Automa�c Measurements
The oscilloscope provides measurements of 36 waveform parameters and the statistics. It
contains voltage, time and delay parameters.
Voltage and time parameters are under the Type option. The results of the last five
selected measurements are displayed at the bottom of screen, above the menu. Delay
parameters are under the All Measure submenu. Set the Delay option to On to display all
the delay parameters.
The contents of this chapter:
◆ Type of measurements
• Voltage Measurements
• Time Measurements
• Delay Measurements
◆ To make automatic measurement
◆ To clear measurements
◆ To make all parameters measurement
130 User Manual