Table of Contents
Advertisement
To Use the Web Server
T3DSO1000 series provides a web server function; you can access and
control the oscilloscope using a web browser. Connect the oscilloscope to your LAN (or
WLAN), then type the oscilloscope's IP address in the web browser. The oscilloscope's
web interface is displayed. The default user name is "admin", and there is no password.
1. Press the Utility button on the front panel to enter the UTILITY function menu.
2. Press the
WebServer softkey on the fourth page of utility function menu to enter the
WEBSERVER menu.
Note: This feature is not available on the T3DSO1102.
●
Password: press this softkey to set a new password.
●
Reset: press this softkey to erase the password.
●
Save: Select Save to make the new password or erasing the password effective.
Figure 97 web server interface
User Manual 179
Advertisement
Table of Contents
