Table of Contents
Advertisement
PA2_41 Sequential start selection
No.
Name
41
Sequential start selection 0: Disable
This parameter is enabled only for LS type.
Select whether sequential start is enabled or disabled.
For details of sequential start, refer to "CHAPTER 12 POSITIONING DATA"
PA2_42 Decimal point position of stand still timer
No.
Name
Decimal point position of
42
stand still timer
This parameter is enabled only for LS type.
Select the least input increment of the stand still timer.
Selection can be made between 1 [ms] and 10 [ms].
PA2_43 Output selection at M code OFF
No.
Name
Output selection at M
43
code OFF
This parameter is enabled only for LS type.
Select the output signal status at M code shutoff.
For details of the M code, refer to "CHAPTER 12 POSITIONING DATA"
Setting range
1: Enable
Setting range
0: 0.01
1: 0.001
Setting range
'
0: 00
H
1: FF'H
Automatic Operation Setting Parameters
CHAPTER 4 PARAMETER
Default
Change
value
0
Power
Default
Change
value
0
Always
Default
Change
value
1
Power
4
4-79
Advertisement
Table of Contents
