System Specifications - Agilent Technologies N5502A Installation Manual

Phase noise measurement system
Table of Contents

Advertisement

1
General Information

System Specifications

This section contains mechanical and environmental specifications,
operating characteristics, power requirements, and PC requirements for the
system.
Table 4
system.
Table 4
Mechanical and environmental specifications
Specifications
Temperature:
Operating
Nonoperating/storage
Altitude
Relative humidity
Air flow space required
System weight:
Approximate, typical
System dimensions:
Height
Width
with rack-mounted flat-panel display
with benchtop PC and display
Depth
Table 5
Warm up time required
Carrier frequency ranges
Offset frequency ranges
System noise response
System spurious response
Downconverter input range
14
contains the mechanical and environmental specifications for a
Table 5
shows the system's operating characteristics.
Values
0 °C to 55 °C (32 °F to 131 °F)
-40 °C to 70 °C (-40 °F to 158 °F)
type tested from 0 to 3000 m (9,842 ft.)
type tested at 95%, +40°C (non-condensing)
102 mm (4 in) on all sides
Benchtop
210 lbs (95.5 kg)
711 to 915 mm (28 to 36 in)
432 mm (17 in)
n/a
1,016 mm (40 in)
711 mm (28 in)
Operating characteristics
1.6 Meter Rack
2 Meter Rack
431 lbs (195.5 kg)
465 lbs (211 kg)
1,620 mm (64 in)
2,020 mm (79.5 in)
600 mm (23.6 in)
600 mm (23.6 in)
1438 mm (56.7 in)
1438 mm (56.7 in)
n/a
n/a
905 mm (35.7 in)
905 mm (35.7 in)
30 minutes
50 KHz to 1.6 GHz
50 KHz to 6 GHz
50 KHz to 18 GHz
50 KHz to 26.5 GHz
0.01 Hz to 2 MHz
0.01 Hz to 100 MHz
–180 dBc/Hz typically (>10 kHz offsets)
≤120 dBc typically
1 GHz to 6 GHz
1 GHz to 18 GHz
1.5 GHz to 26.5 GHz
E5505A Installation Guide

Advertisement

Table of Contents
loading

Table of Contents