Fuel Pump Relay - KYMCO UXV 500i Service Manual

22. FUEL INJECTION SYSTEM
UXV 500i
Battery

FUEL PUMP RELAY

INSPECTION
Remove the fuel pump relay.
Connect the ohmmeter to the fuel pump
relay connector terminals.
Connection: R/L-B/R
Connect 12 V battery with the fuel pump
Fuel Pump Relay
relay connector.
Connection: R/Y-O/R
There should be continuity only when 12 V
battery connected.
If there is not continuity when the 12 V
battery is connected, replace a fuel pump
relay.
REMOVAL
Disconnect the fuel pump relay connector
and remove it from frame.
Fuel Pump Relay
22-18