KYMCO UXV 500i Service Manual page 222

11
.FINAL REDUCTION/
TRANSMISSION SYSTEM
Install the new balance
shaft/countershaft/primary drive shaft bearing
by using the special tool.
Special tool:
Bearing driver
DRIVE SHAFT BEARING
REPLACEMENT
Remove the four bolts and two set plates.
Remove the bearing.
Install the new bearing by using the special
tool.
Special tool:
Bearing driver
Install the set plates and tighten the new
bolts.
11-13
A120E00014
A120E00014
Set Plate
Set Plate
Bearing Driver
UXV 500
Bearing Drive