Table of Contents
Advertisement
7. ENGINE REMOVAL/INSTALLATION
Disconnect the breather hose from cylinder
head cover
Disconnect the vacuum hose from intake
pipe.
Slide the rubber sleeve back to expose the
starter motor wire nut.
Remove the starter motor cable nut for
disconnect the starter motor cable.
Remove the bolt and then disconnect the
engine ground cable from starter motor.
Remove the A.C.Generator and ignition
pulse generator connectors.
Breather Hose
Vacuum Hose
Starter Cable
Rubber Sleeve
Ignition Pulse Generator
A.C. Generator Connector
UXV 500
Engine Ground Cable
7-4
Advertisement
Chapters
Table of Contents
Troubleshooting
