KYMCO UXV 500i Service Manual page 308

16
. BRAKE SYSTEM
REAR BRAKE PADS
Rear brake
Remove the rear wheel. ( refer to the
" REAR WHEEL
REMOVAL/INSPECTION/
INSTALLATION " section in the chapter
15 ).
The replacement of rear brake and front
brake pads are the same.
Rear brake (combined)
Remove the rear wheel. ( refer to the
" REAR WHEEL
REMOVAL/INSPECTION/
INSTALLATION " section in the chapter
15 ).
Remove the two brake pad pins from the
brake caliper.
Remove the two mounting bolts from brake
caliper and then remove brake caliper.
＊
● Do not operate the brake lever during
or after brake pad removal.
● Replace the brake pads as a set,
otherwise braking performance will be
adversely affected.
16-5
UXV 500