KYMCO UXV 500i Service Manual page 253

13
. DRIVE TRAIN
Wipe off any grease and remove the snap ring
from the groove on the front drive axle.
Remove the cage and boot from the front
assy cvjs.
＊
Do not disassemble the wheel side joint.
If any damages are found, replace the
wheel side joint with a new one.
INSPECTION
Inspect the circlip and snap ring for wear or
damage.
If any damages are found, replace them with
new ones.
Inspect the cage and inner surface of case
side joint for pitting, wear or damage.
If any damages are found, replace them with
new ones.
Snap Ring
Case Side Joint
UXV 500
Cage
Snap Ring Circlip
Cage
13-6