Front Wheel Hub Removal/Inspection; Installation - KYMCO UXV 500i Service Manual

14.
FRONT WHEEL/FRONT SUSPENSION
STEERING SYSTEM
FRONT WHEEL HUB
REMOVAL/INSPECTION/

INSTALLATION

REMOVAL
Place the machine on a level place.
Remove the front wheel ( refer to the
" FRONT WHEEL
REMOVAL/INSPECTION/
INSTALLATION" section in this chapter)
Elevate the front wheels by placing a
suitable stand under the frame.
＊
Support the machine securely so there
is no danger of it falling over.
Remove the cotter pin.
Apply the front brake and then remove nut,
washer and front wheel hub.
INSPECTION
Check the wheel hub for cracks or deamage.
Check the wheel hub splines for wear or
damage.
14-5
Nut/Washer
Cotter Pin
UXV 500