KYMCO UXV 500i Service Manual page 63

Hide thumbs Also See for UXV 500i:

Table of Contents

. INSPECTION/ADJUSTMENT

Check the rear axle nut for looseness.

If the axle nuts are loose, tighten them to the

specified torque.

Front: 7 kgf-m (70 N-m, 50 lbf-ft)

Rear: 10 kgf-m (100 N-m, 72 lbf-ft)

Inspect the tire surfaces.

Replace if wear or damage.

Tire wear limit: 4 mm (0.16 in)

It is dangerous to ride with a worn out

tire. When a tire wear is out of

specification, replace the tire

immediately.

WHEEL INSPECTION

Inspect the wheel.

Replace if damage or bends

Always balance the wheel when a tire or

wheel has been changed or replaced.

• Never attempt even small repairs to the

• Ride conservatively after installing a

tire to allow it to seat itself properly on

Rear Axle Nut

Chapters

Table of Contents