KYMCO UXV 500i Service Manual page 315

16
. BRAKE SYSTEM
BRAKE SYSTEM BLEEDING
1. Connect a transparent hose to the bleed
valves (right and left caliper).
2. Fully apply the brake pedal after
continuously pull it several times. Then,
loosen the right caliper bleed valve nut to
bleed air from the brake system.
3. Fully apply the brake pedal after
continuously to tread it several times.
Then, loosen the left caliper bleed valve
nut to bleed air from the brake system.
4. Repeat these steps until the brake system
is free of air.
＊
When bleeding air from the brake system,
the brake fluid level should be kept over
1/2 of the brake reservoir height.
Bleed Valve
UXV 500
16-12